Fluke Networks 26000900 Pro3000™ Analog Tone and Probe Kit

Product Code: 26000900

Quick Overview

Fluke Networks Pro3000™ Analog Tone and Probe Kit

IN STOCK - Shipped same day If ordered before 1pm AEST weekdays, otherwise shipped the following business day

$142.50 incl. GST

Details

Overview


The Pro3000 Analog Tone and Probe is your best choice for toning and tracing wire on non-active networks; and specifically for identifying individual pairs with SmartTone® technology.


Angled bed-of-nails clips allow easy access to individual wires; and the RJ-11 connector is ideal for use on telephone jacks. The large loud speaker on the network probe allows you to hear through drywall; wood or other enclosures to find wires quickly and easily.


You can send this loud tone up to 10 miles (16 kilometers) on most cables! Attach the nylon pouch to your belt; and you will be equipped for any wire identification job.


 




Features


Pro3000 Capability


Use the SmartTone capability of the Pro3000 Analog Tone Generator to identify the right pair. When touching the wires together and momentarily shorting the far end of a cable pair; the SmartTone technology will change the cadence of the tone generated. This tone change you hear through the probe positively verifies the correct wire pair. SmartTone provides five distinct tones for exact pair identification.


 


Tone Generator features:



  • SmartTone technology

  • Send tone signal up to 10 miles on most cables

  • Line cord features angled bed-of-nails clips and ruggedized RJ-11 plug for direct access to phone and data jacks without adapters

  • External switch allows selection of solid or alternating tone options; indi­cated with solid or flashing LEDs

  • Continuity testing

  • Line polarity confirmation





 


Pro3000 Design


The Pro3000’s ergonomic sleek design is easy to handle and use. The large speaker on the probe makes the tone easier to hear through walls; enclosures; wood or plaster. A recessed on/off button helps prevent the probe from accidentally being turned on in the pouch. It accommodates a headset (sold separately) for use in noisy environments.


 


Probe features:



  • Loud large speaker amplifies tone through walls; enclosure; wood or plaster

  • Easy-to-use adjustable volume control dial

  • “Quick-twist” tip for easy replacement

  • Free spare tip inside Pro3000 Tone and Probe Kit


 


Specifications
















































Pro3000 Analog Toner Specifications



User interface



Slide switch selects Continuity or Tone Mode


Push button switch selects SOLID; ALT or OFF


Tone mode LED


Continuity/Polarity LED



Solid Frequency



1000 Hz nominal



Alternating Frequency



1000/1500 Hz nominal



Over Voltage Protection



60 Vdc in Toner/Polarity Mode



Output Power in Tone Mode



8 dbm into 600 ohms



Output Voltage Level in Continuity Mode



8 Vdc with fresh battery



Battery



9V alkaline



Temperature



Operating: -20° C to 60° C; Storage: -40° C to 70° C



Case dimensions



2.7 in. x 2.4 in. x 1.4 in. (6.9 cm x 6.1 cm x 3.6 cm)





























Pro3000 Analog Probe Specifications



User interface



ON/OFF push button


Volume dial


Replaceable tip


3.5 mm earphone jack



Battery



9V alkaline



Temperature



Operating: -20° C to 60° C; Storage: -40° C to 70° C



Case dimensions



9.8 in. x 1.6 in. x 1.3 in. (24.9 cm x 4.1 cm x 3.3 cm)



 




Why shop with Data Depot; Australia's leading online seller of Fluke Networks testers?


Data Depot is proud to supply a huge range of cable testers; fibre testers; test phones; hand tools; certification testers; cable fault diagnostics equipment; fibre cleaning tools; termination tools and more from Fluke Networks Australia. You can buy Fluke Networks online through our website 24/7 for fast and reliable delivery.


Data Depot is one of Australia's leading online sellers of data products & accessories. Backed by the Sonepar Group; the leading B2B electrical wholesaler in the world; we have access to the biggest brands such as APC by Schneider Electric; Fluke Networks; Clipsal; Netscout; Panduit; D-Link; ConnectBlue and more - as well as the very best pricing & quick delivery Australia-wide.


Here are just a few reasons our customers keep coming back:



  • - Free shipping on orders over $150 ($14.95 flat rate for orders under $150)

  • - Secure payment methods (VISA; Mastercard & PayPal)

  • - Stock fulfilment from 7 locations nationally

  • - Helpful support base located in Melbourne; Australia (call 1300 944 030 to speak with us)


If you are looking for Fluke Networks testing equipment that is not currently listed on our website; please get in contact with us for pricing and lead-times. We direct partnerships with all suppliers and can source just about anything quickly and at a great price. 


Get in touch with us today - 1300 944 030!

"

Specifications

Stock Availability stockcms-in-stock-1
GTIN/Barcode 754082038917

View File26000900 Datasheet    Size: (171.72 KB)
View File26000900 User Guide    Size: (803.89 KB)

Write Your Own Review

Only registered users can write reviews. Please, log in or register