You have no items in your shopping cart.
need help? call us on 1300 944 030
Fluke Networks Cable Tester Comparison
Qualifies cabling bandwidth for VoIP; 10/100/1000 Ethernet; CATV
Saves and uploads wiremap and qualification test results
Measures distance to performance fault (e.g. crosstalk or impedance)
Provides service detection (POTS; Ethernet; PoE)
Built-in tone generator
Measures distance to short; length
Verifies cable wiremap; length
Measures distance to breaks
CableIQ Advanced IT Kit Includes:
- CableIQ main unit with remote adapter
- CableIQ Reporter software CD
- IntelliTone 200 Digital Probe
- Remote IDs #2-7
- (2) RJ45-RJ45 patch cord
- USB cable
- Coax 'F' push-on adapter
- 75-ohm coax patch cord
- RJ45/11 universal coupler
- RJ11-RJ11 patch cord
- Owners CD and quick start guide
- (4) AA batteries
- Test accessory soft pouch
- Duffel style bag
The network tech's vision into cabling bandwidth
CableIQ qualification tester is the first cabling bandwidth tester for network technicians. This Ethernet network cable tester gives even the most novice tech the vision to see what speeds existing cabling can support; quickly isolate cabling from network problems; and discover what is at the far end of any cable. That means network techs can close trouble tickets faster; reduce on-call time; and save money by better utilizing their existing infrastructure.
Reduce escalated problems by as much as 30%
CableIQ qualification tester's powerful network troubleshooting capability and intuitive interface enable your frontline technicians to identify and troubleshoot a wider range of problems within your network infrastructure. Is the port active? Are the duplex settings matched? Is it a network problem or a Ethernet cable problem? Can the Ethernet cable support the required network bandwidth? CableIQ network cable tester is the only Ethernet cable tester that can answer all these questions before trouble tickets are escalated to the next level reducing problem escalation by up to 30%.
When you deploy Voice over IP (VoIP) or Gigabit Ethernet; you want to make sure that the existing cabling will support the bandwidth requirements of your new equipment. Your cabling was certified; but moves adds and changes have rendered many links incapable of running desired speeds. CableIQ quickly reveals whether a link; including patch cords; is qualified for voice; 10/100BASE-T; VoIP; or Gig. Knowing your cabling's bandwidth capabilities before upgrading can prevent countless hours of future downtime and labor hours wasted on unnecessary troubleshooting.
See what speeds your existing cabling can support.
CableIQ's four-second Autotest clearly indicates with a check mark which speeds and applications the tested cable can run.
Plug into any cable; patch panel; or wall jack and see both the cable details (length/wiremap) and far-end device details (speed/duplex settings) at once. A series of both cable and network test functions help you isolate connectivity problems. For instance; if Discover mode shows duplex settings are matched but the problem persists; run Autotest to see if the cabling can support the required bandwidth. If a link is not qualified; CableIQ provides detailed information on the nature and location of cabling performance faults such as crosstalk or large impedance changes. With CableIQ your techs can close trouble tickets faster by cutting cable troubleshootingtime in half.
Troubleshoot cabling faults in half the time.
This screen shot represents a cabling link that did not qualify for 1000BASE-T because of a connection fault at 4.1 meters.
Free up 10% or more of your switch ports
CableIQ's Discover mode shows you exactly what's at the far end of any cable. At the switch; test each cable one at a time. You can quickly see whether the cable is open at the far end; or is connected to a PC. Or use CableIQ's hub blink feature from the workstation to flash the corresponding switch port LED. You may be surprised at how many unused ports you can free up and redeploy using CableIQ.
Determine where installed cables are routed; all from one location.
Attach remote ID's in different locations; then perform multiple cable tests from the distribution center or wiring closet. CableIQ provides the wiremap; pair lengths; distance to fault; and remote ID number of each tested cabling link.
Intelligent wiremap tests for length; shorts; split pairs; or opens and displays with an intuitive graphical interface where a fault is located.
CableIQ's Intelligent Wiremap shows pin 6 open at far end of tested cable (130 ft/34 meters).
Locate cables and wires with superior accuracy
CableIQ supports IntelliTone digital toning by:
- Finding cables easier and tracing with better accuracy than any other tool on the market
- Toning and tracing safely on a live network
- Providing two digital tones and four analog tones
- Featuring IntelliTone cable mapping; after tracing; use the IntelliTone Pro Probe 200 to verify wiremap
Empower frontline techs with an easy-to-use-tool
Intuitive user interface and graphical display guides user with little or no training required.
- Rotary knob makes learning easy and operation simple you always know what test mode is selected
- Portable; lightweight; rugged ergonomic design for easy field use
- Four AA batteries - Long lasting battery life for several weeks of testing
- Remote adapter doubles as a protective endcap.
Customer quote: "I handed CableIQ to our level III techs; they turned the unit on and began testing within two minutes of reviewing the various available selections."
CableIQ Kit Choices
CIQ-KIT; CableIQ Advanced IT Kit
The CableIQ Advanced IT Kit is designed to maximize the efficiency of any cable qualification job. Use the included IntelliTone 200 Probe to find cables quickly and definitively; even on active networks. Use the included six smart cable IDs to perform a high volume of qualification tests in a short period of time. Each smart ID has the capability to perform a simple wiremap test or a full qualification test. Up to seven qualification tests can be performed without returning to the patch panel. The rugged carry case can be used to easily transport tools from one job to another.
What is Qualification?
Qualification is a new category of testers designed to meet the emerging needs of network technicians who need to upgrade to higher network speeds as well as troubleshoot connectivity problems. Qualification testers; like Fluke Networks new CableIQ Qualification Tester; determines if an existing cabling link can or can not support certain network speeds and technologies. This differs from certification testers; like the DTX CableAnalyzer; which guarantees cabling installations comply with TIA/ISO performance standards and basic verification testers; like the MicroScanner Pro; which tests if the cable is connected correctly.
Qualification testers allow network technicians to perform a series of troubleshooting steps to better isolate cabling from network problems. For example; a first step in troubleshooting a network connectivity problem might be to check the speed and duplex settings of connected devices. If the tester shows the settings are matched; but the problem persists; a qualification test can be performed. Performing a qualification test will allow the technician to identify whether insufficient cabling bandwidth is the cause of the problem. Knowing your cabling's bandwidth capability allows you to close trouble tickets faster and helps ensure seamless upgrades to higher network speeds.
Choosing the right tool for the job
When to use a qualification tester: If you are a network technician; and need to see whether the existing cabling will support your 1000BASE-T network; a qualification tool is the right choice. If you need to troubleshoot connectivity problems and isolate cabling problems from network problems; then qualification is the perfect solution. If you have an existing network and are doing small adds; moves; and changes; or are setting up a temporary network and just need to qualify it for a specific network technology; a qualification tool is a good option.
When to use a certification tester: If you're a commercial installer or network owner who needs to prove that all cabling has been installed correctly; and meets TIA or ISO link specifications; you must certify it. If you are in a troubleshooting environment; and need to show unequivocally that the link under test is failing category 5e or 6 performance requirements according to TIA or ISO standards; your only choice is a certification tool. If you have a mixture of fiber and copper cabling; and often need to test both; cable certification tools do that best.
To receive the support and financial security of a manufacturer's warranty; certification to TIA/ISO standards is your only option. Anything else makes the installer liable for the performance of the installation which can be quite costly. For example; a large 1000 link installation could represent a $100;000 (USD) project; which can be a hefty liability if manufacturer warranty is not obtained.
When to use a verification tool: Verification tools are typically used by any technician who pulls and terminates cable or performs basic moves; adds and changes. These tools are used as a first line of defense in finding connection and wire-pairing faults.
Cable types supported
UTP; STP; FTP; SSTP; RG6; RG59; audio and security
1000BASE-T; 100BASE-TX; 10BASE-T; VoIP; 1394b S100; TELCO; Wiremap only; Coax
Wiremap; length; cable signal performance; digital toner; analog toner; Ethernet port detection and identification; analog telephone detection; blink port light; continuity; speaker test; cable fault finding; video signal detection.
Can detect single wire faults and supports MultiMap mode with up to seven remote office identifiers. Draws proportional wire length to breaks. Detects split pairs.
Measures crosstalk and impedance and compares against appropriate limits based on qualification test selected. Detects location of large point sources as well as distributed sources in the cabling if they are sufficient to disqualify the application
Up to 250 qualification test results
Battery type: 4 AA (NEDA 15A; IEC LR6) alkaline batteries
20 hours of typical use; without backlight
Other battery types supported
4AA photo lithium; NIHM; NICAD
Dimensions and weight
7in x 3.5in x 1.75in (17.8cm x 8.9cm x 4.5cm) 1.2 lb (0.55 kg)
Why shop with Data Depot; Australia's leading online seller of Fluke Networks testers?
Data Depot is proud to supply a huge range of cable testers; fibre testers; test phones; hand tools; certification testers; cable fault diagnostics equipment; fibre cleaning tools; termination tools and more from Fluke Networks Australia. You can buy Fluke Networks online through our website 24/7 for fast and reliable delivery.
Data Depot is one of Australia's leading online sellers of data products & accessories. Backed by the Sonepar Group; the leading B2B electrical wholesaler in the world; we have access to the biggest brands such as APC by Schneider Electric; Fluke Networks; Clipsal; Netscout; Panduit; D-Link; ConnectBlue and more - as well as the very best pricing & quick delivery Australia-wide.
Here are just a few reasons our customers keep coming back:
- - Free shipping on orders over $150 ($6.95 flat rate for orders under $150)
- - Secure payment methods (VISA; Mastercard & PayPal)
- - Stock fulfilment from 7 locations nationally
- - Helpful support base located in Melbourne; Australia (call 1300 944 030 to speak with us)
If you are looking for Fluke Networks testing equipment that is not currently listed on our website; please get in contact with us for pricing and lead-times. We direct partnerships with all suppliers and can source just about anything quickly and at a great price.
Get in touch with us today - 1300 944 030!"