Fluke Networks FTK1000 Simplifiber PRO Basic Fiber Verification Kit

Product Code: FTK1000

Quick Overview

Simple-to-use fiber-loss tester with advanced time-saving features. Choose from various kits with configurations to meet your fiber verification, inspection, and cleaning needs. 

ON ORDER - Please allow 2-4 weeks for delivery Need it quicker? Call us now to discuss, 1300 944 030

Regular Price: $5,203.00

Special Price $3,187.25

Details

Today’s high-bandwidth premises networks depend on a reliable fiber optic infrastructure. Proper installation and maintenance of fiber cabling is imperative for minimizing network downtime. Whether you require basic fiber verification capabilities, advanced troubleshooting and inspection, or documented loss and power measurements, Fluke Networks’ SimpliFiber® Pro Optical Power Meter and Fiber Test Kits are the best first-line fiber instruments to meet your needs.

SimpliFiber® Pro Optical Power Meter and Fiber Test Kits include all the tools necessary to verify and troubleshoot optical fiber cabling systems, measure loss and power levels, and inspect and clean connector end-faces. Replacing the popular SimpliFiber series, these next generation optical loss test kits boast industry-leading functions such as dual-wavelength testing and automatic-wavelength detection, in addition to unique features such as CheckActive™, FindFiber™, and Min/Max. With such advanced, yet easy-to-use, capabilities that reduce test times, SimpliFiber Pro is simply the best first-line fiber test kit on the market.

  • Single-port, simultaneous dual-wavelength feature completes testing in half the time and saves measurements from both wavelengths into one record
  • Additional wavelengths of 1490 and 1625 nm
  • CheckActive™ feature emits an audible tone and displays an icon when a live fiber is detected, eliminating the need to set up a measurement
  • FindFiber™ Remote ID enables one individual to quickly identify cable connections or routings (especially useful at patch panels), eliminating the need for multiple technicians on opposite ends of a fiber link to match color combinations
  • Min/Max capability automates precision tracking of intermittent power fluctuations
  • Large internal memory save 1000 results which enables continuous testing and recording
  • LinkWare Cable Test Management software helps to analyze test results and create professional test reports
  • Various kit configurations for all “first line” fiber handling needs, including fiber verification, inspection, and cleaning – all housed in a professional, rugged carrying case

Specifications

 

Environmental Specifications
Operating Temperature -10º C to 50º C
Storage Temperature -20º C to 50º C
Operating Humidity
  • 95% (10º C to 35º C) Non-Condensing
  • 75% (35º C to 40º C) Non-Condensing
  • Uncontrolled <10º C
EMI, RFI, EMC Standards compliant1

1 Conforms to relevant European Union directives; Conforms to relevant Australian standards; Listed by the Canadian Standards Association; Complies with 21CFR.1040.10,11, and EN60825-1, 2:2007 (Class 1, Hazard Level 1)
 

Optical Power Meter
Detector Type InGaAs
Calibrated Wavelengths 850 nm, 1300 nm, 1310 nm, 1490 nm, 1550 nm, 1625 nm
Measurement Range
  • +10 to -52 dBm (850 nm)
  • +10 to -60 dBm (1300, 1310, 1490, 1550, 1625 nm)
Power Measurement Linearity
  • ±0.2 dB (850 nm)1
  • ±0.1 dB (1300, 1310, 1490, 1550, 1625 nm)2
Power Measurement Uncertainty3 ±0.25 dB
Display Resolution, dB or dBm 0.01 dB
Auto Dual-Wavelength Switching Yes
Power Display Units dBm, mW, μW
Auto-Wavelength Detection Yes
Data Storage 1000 records, multiple wavelengths per record
External Interface USB, 2.0 full speed
Optical Connector Removable adapter, SC adapter as default, optional adapters include LC, ST
Display update rate 1 reading per second
Reference Individually set for each wavelength
FindFiber ID detection Yes
Power Requirement 2 AA Alkaline batteries
Battery Life4 > 50 Hours (typical)
Automatic Power Off 10, 20, 30 or 60 minutes (can be disabled by user)
Low Battery Warning Yes, low battery icon blinks
Size (L x W x H) 6.4 in x 3.2 in x 1.5 in (16.5 cm x 8.0.cm x 3.9 cm)
Weight 11.5 oz (325 grams)

1 For 850nm, ±0.2 dB for power from 0 to -45 dBm, ±0.25 dB for power < -45 dBm
2 ±0.1dB for power from 0 to -55 dBm, ±0.2 dB for power > 0 dBm and < -55 dBm
3 23°C ±2°C, power level -20dBm, continuous wave, 62.5/125µm at multi mode wavelengths, 9/125 µm at 1310,1490, 1550 and 1625 nm; add 0.1 dB for 1625 nm,
4 For measured power levels 0 dBm or less, battery life depends on the condition and type of batteries used. Fluke Networks recommends alkaline batteries.
 

Multimode Optical Source
Emitter Type LED
Central Wavelength 850 nm, 1300 nm
Wavelength Accuracy
  • 850 nm: +/-30 nm
  • 1300 nm: +/- 20 nm
Spectral Width (FWHM)
  • 850 nm: 50 nm (typical)
  • 1300 nm: 135 nm (typical)
Minimum Output Power 850/1300 nm: ³  -20 dBm
Power Output Stability1 ±0.1 dB over 8 hours
Auto Dual-Wavelength Switching Yes. Can be enabled/disabled by user.
Optical Output Connector Fixed SC
FindFiber Code Generation Yes. Fixed at ID 1.
Modes CW, 2 kHz modulated, Auto-wavelength
Power Requirement 2 AA Alkaline batteries.
Battery Life2 40 hrs (typical)
Automatic Power Off 30 minutes (can be disabled by user)
Low Battery Warning Yes, LED blinks
Size (L x W x H) 5.6 in x 3.2 in x 1.6 in (14.2 cm x 8.1 cm x 4.1cm)
Weight 1.8 oz (278 g)

1 23° C ± 2° C, after 5 minutes warm-up time
2 In auto-wavelength mode, battery life depends on the condition and type of batteries used. Fluke Networks recommends alkaline batteries.
 

Singlemode Optical Source
Emitter Type 1310 nm/1550 nm: dual FP laser
1490 nm/1625 nm: dual DFB laser
Central wavelength
  • 1310 nm: ±20 nm
  • 1550 nm: ±30 nm
  • 1490 nm: ±3 nm
  • 1625 nm: ±5 nm
Wavelength Accuracy
  • 1310 nm: +/- 20 nm
  • 1550 nm: +/- 30 nm
Spectral width (RMS)
  • 1310 nm: 2 nm (maximum)
  • 1550 nm: 3 nm (maximum)
  • 1490 nm/1625 nm: 1 nm (maximum)
Minimum output power 1310/1550 nm ≥ -7dBm (typical)
1490 nm/1625 nm: ≥ -3 dBm (typical)
Power Output Stability1 ±0.25 dB over 8 hours
Auto Dual-Wavelength Switching Yes. Can be enabled or disabled by user.
Optical Connector Fixed SC
Launch Condition 9/125 μm fiber
FindFiber Code Generation 1310/1550 source is fixed at ID 2
1490 nm/1625 nm is fixed at ID 3.
Modes CW, 2 kHz modulated, Auto-wavelength
Power Requirement 2 AA Alkaline batteries
Battery Life2 30 hrs (typical)
Automatic Power Off 30 minutes (can be enabled or disabled by user)
Low Battery Warning LED blinks.
Size (L x W x H) 5.6 in x 3.2 in x 1.6 in (14.2 cm x 8.1 cm x 4.1cm)
Weight 9.8 oz (278 grams)

1 23° C ± 2° C, after 5 minutes warm-up time
2 In auto-wavelength mode, battery life depends on the condition and type of batteries used. Fluke Networks recommends alkaline batteries.
 

FindFiber Source Specifications
Emitter Type Laser
Source Connector Fixed SC
FindFiber Code Generation 1 through 8. Default is 3.
Power On/Low-battery Indicator LED
Power Requirement 2 AA Alkaline batteries
Battery Life > 80 Hours (typical)
Automatic Power Off 30 minutes
Low Battery Warning LED blinks
Size (L x W x H) 7.1 in x 1.3 in x 1.0 in (17.9 cm x 3.2 cm x 2.5 cm)
Weight 4.4 oz (125 g)
Safety Meets Class 1 CDRH

 

 
 

Documents

 

Data Sheets

Title/DescriptionDownload 
Copper and Fiber Basic Technicians Kit Data Sheet: MicroScanner2 And SimpliFiber Pro
Download PDF
504.31 KB
FindFiber Remote ID Source spec sheet
Download PDF
2.22 MB
LinkWare Data Sheet
Download PDF
SimpliFiber Pro Multimode and Singlemode Sources Specifications
Download PDF
217.2 KB
SimpliFiber Pro Multimode and Singlemode Sources Specifications
Download PDF
744.94 KB
Simplifiber Pro Optical Power Meter And Fiber Test Kits Datasheet
Download PDF
3.33 MB
 
 

Catalogs

Title/DescriptionDownload 
Fluke Networks Solution Catalog
The Guide for selecting and ordering Fluke Network Solutions and Products
Download PDF
5.58 MB
 
 

Application Notes

Title/DescriptionDownload 
Application Note: How to Choose the Right Power Meter Light Source
Top 4 Questions to Ask a Power Meter Light Source Vendor
Download PDF
519.47 KB
Encircled Flux Application Note
How will Encircled Flux launch conditions improve my link loss measurements?
Download PDF
1.08 MB
Fiber Testing Best Practices - Pocket Guide
Download PDF
4.93 MB
 
 

White Papers

Title/DescriptionDownload 
Fiber Test Best Practices: Tier 1 Certification
Download PDF
189.22 KB
 
 

Why shop with Data Depot, Australia's leading online seller of Fluke Networks testers?

Data Depot is proud to supply a huge range of cable testers, fibre testers, test phones, hand tools, certification testers, cable fault diagnostics equipment, fibre cleaning tools, termination tools and more from Fluke Networks Australia. You can buy Fluke Networks online through our website 24/7 for fast and reliable delivery.

Data Depot is one of Australia's leading online sellers of data products & accessories. Backed by the Sonepar Group, the leading B2B electrical wholesaler in the world, we have access to the biggest brands such as APC by Schneider Electric, Fluke Networks, Clipsal, Netscout, Panduit, D-Link, ConnectBlue and more - as well as the very best pricing & quick delivery Australia-wide.

Here are just a few reasons our customers keep coming back:

  • - Free shipping on orders over $150 ($6.95 flat rate for orders under $150)
  • - Secure payment methods (VISA, Mastercard & PayPal)
  • - Stock fulfilment from 7 locations nationally
  • - Helpful support base located in Melbourne, Australia (call 1300 944 030 to speak with us)

If you are looking for Fluke Networks testing equipment that is not currently listed on our website, please get in contact with us for pricing and lead-times. We direct partnerships with all suppliers and can source just about anything quickly and at a great price. 

Get in touch with us today - 1300 944 030!


Specifications

Stock Availability stockcms-on-order-2
GTIN/Barcode 754082063117

No attachment found.

Write Your Own Review

Only registered users can write reviews. Please, log in or register