Fluke Networks MS2-KIT Microscanner Network Cable Tester Kit with Probe

Product Code: MS2-KIT

Quick Overview



MicroScanner2 Professional Kit includes: MicroScanner2 Cable Verifier with main wiremap adapter, remote identifiers #2-7, IntelliTone Pro 200 probe, shielded twisted-pair RJ45 patch cord, RJ11 patch cord, clip-set RJ45 to 8 alligator clip bare wire adapter, F Coax push on patch cord, accessory soft pouch, (2) AA alkaline batteries, (1) 9V alkaline battery, MicroScanner2 Getting Started Guide, MicroScanner2 Owners CD, IntelliTone Pro Getting Started Guide, IntelliTone Pro owners CD, packaged in a deluxe Fluke Networks carry case.


IN STOCK - Shipped same day If ordered before 1pm AEST weekdays, otherwise shipped the following business day

$1,360.98 incl. GST

Details

Fluke Networks Cable Tester Comparison

Product Features

Cable IQ

(CIQ-100)

Microscanner2

(MS2-100)

Qualifies cabling bandwidth for VoIP, 10/100/1000 Ethernet, CATV

X

 

Saves and uploads wiremap and qualification test results

X

 

Measures distance to performance fault (e.g. crosstalk or impedance)

X

 

Provides service detection (POTS, Ethernet, PoE)

X

X

Built-in tone generator

Digital/Analog

Digital/Analog

Measures distance to short, length

X

X

Verifies cable wiremap, length

X

X

Measures distance to breaks

X

X

 

MicroScanner2 Professional Kit includes:

  • MicroScanner2 Cable Verifier with main wiremap adapter, remote identifiers #2-7
  • IntelliTone Pro 200 probe
  • Shielded twisted-pair RJ45 patch cord
  • RJ11 patch cord
  • Clip-set RJ45 to 8 alligator clip bare wire adapter
  • F Coax push on patch cord, accessory soft pouch
  • (2) AA alkaline batteries
  • (1) 9V alkaline battery
  • MicroScanner2 Getting Started Guide
  • MicroScanner2 Owners CD
  • IntelliTone Pro Getting Started Guide
  • IntelliTone Pro owners CD
  • Packaged in a deluxe Fluke Networks carry case

 

Overview

Streamline verification testing 
The MicroScanner2 Cable Verifier presents a revolutionary change in voice, data, and video cable testing. It starts by taking results from what was four different test modes and displaying them all at once – graphical wiremap, pair lengths, distance to fault, cable ID, and far end device.  What’s more, its integrated RJ11, RJ45, and coax cable test ports support virtually any type of low-voltage cable testing with no need for awkward adapters.  The end result is reduced test time and technician error.  That makes high-quality installations more efficient than ever. 

Rule out service problems fast
Today’s communications technicians have a lot more problems to deal with than just the cabling.  They have to rule out a whole host of potential cable and service issues before determining the cause of a connection problem.  Is there telephone voltage?  What’s the polarity?  Is there an Ethernet switch at the far end?  Is PoE available?  MicroScanner2 acknowledges this, giving technicians high power vision to verify today’s most common voice, data, and video services.   That means faster, more comprehensive troubleshooting.

 

Features

Revolutionary Interface

Yesterday’s cable verification testers force users to toggle between up to four different modes of operation to view all test results.  This not only slows the test process, but also causes frustration and leads to high user error rates.  MicroScanner2 has defeated this convention by displaying key test results – wiremap, pair lengths, distance to fault, cable ID, and far end device – all on one screen.  Plus it features an oversized, backlit LCD screen with the power to display wiremap results graphically, which brings unprecedented comfort and clarity to the user experience.

Multimedia Support

Tired of losing or breaking all the adapters needed for testing the various voice, data, and video media types?  MicroScanner2 makes these awkward adapters things of the past with built-in RJ11, RJ45, and coax support.  Both the main unit and the far-end identifiers can be used to test telephone jacks, Ethernet jacks, and CATV outlets right out of the box.  Just one more way MicroScanner2 streamlines cable verification.

MicroScanner2 features built-in IntelliTone digital and analog toning to precisely locate virtually any cable or wire pair, regardless of work environment.  Use digital mode to locate high-grade data cabling (Cat 5e/6/6a) in bundles, or at switches, patch panels, or wall outlets.  Digital mode especially performs in environments with high data, RF, or electromagnetic interference.  When coupled with the IntelliTone 200 Pro Probe, it can also be used to verify cable wiremap from either the tester end or the probe end.

Use analog mode on voice-grade cabling (Cat 3 and below), as well as coax, security/alarm, and speaker wiring.  These cables are optimized for lower frequency transmissions, and therefore are more easily isolated with a low-frequency tone.  MicroScanner2’s smart analog tone eliminates frustrating guesswork locating individual wire pairs during installations by changing songs each time the pair under test is shorted together.  This provides technicians a decisive way to identify individual wire pairs before punching them down or when diagnosing voice transmission problems.

Voice, data, video technicians have a lot more problems to deal with than just the cabling.  They have to rule out a whole host of potential cable and service issues before determining the cause of a connection problem.  MicroScanner2 acknowledges this, giving technicians high power vision to detect today’s most common service problems.   Detect the presence of POTS voltage and verify polarity.  Verify powered 10/100/1000 Ethernet switches at the far end.  Or, confirm proper PoE voltage and pairs.

Rugged Housing

With all the abuse you put your tools through, you can’t afford for them to be delicate.  MicroScanner2 features a rubber wrap-around holster that makes it the right tool for even the toughest jobs.  Toss it into your toolbox.  It can handle it.  Plus, it now comes standard with a vinyl carry pouch for enhanced protection and convenience.

 

Specifications

Test Connectors

Twisted-pair: UTP, FTP, SSTP 8-pin modular jack accepts 8-pin modular (RJ45) and 4-pin modular (RJ11) plugs; Coax: F-connector for 75 Ω, 50 Ω, 93 Ω cables

Cable Tests

Length (460 m or 1500 ft. with resolution to 0.3 m or 1 ft.), wiremap to TIA-568A/B standards, remote ID locators; displays results on one screen

Tone Generator

IntelliTone digital tone: [500 KHz]; analog tones: [400Hz, 1KHz]

PoE Detection

Solicits and detects the presence of 802.3af compatible PoE (Power over Ethernet) devices

Ethernet Port Test

Advertised speed of 802.3 Ethernet ports (10/100/1000)

Power Source

Battery type: 2 AA (NEDA 15A, IEC LR6) alkaline batteries
Battery life: 20 hours of typical use
Other compatible battery types: 2 AA photo lithium, NIMH, NICAD

Dimensions

3 in x 6.4” x 1.4 in (7.6 cm x 16.3 cm x 3.6 cm)

Weight

0.8 lbs. (363 grams)

Display

Monochrome liquid crystal display (LCD) with backlight

Calibration

User-configurable NVP for twisted pair and coax; determines actual NVP with known length of cable

Operating Temperature

32 °F to 113 °F (0 oC to 45 oC)

Storage Temperature

-4 °F to +140 °F (-20 oC to +60 oC)

Operating Humidity

90 % (50 °F to 95 °F; 10 oC to 35 oC)

(%RH without condensing)

75 % (95 °F to 113 °F; 35 oC to 45 oC)

Shock Vibration Meets requirements for MIL-PRF-28800F for Class 2 random vibration; 1 m drop test with and without wiremap adapter attached
Safety EN 61010-1 2nd Edition
Altitude 4000 m; Storage: 12000 m
EMC EN 61326-1
Agency Certifications N10140 C-Tick EMC standard; FCC Part 15 Class A; CE European Union Directives Pollution Degree 2
Warranty One year

Why shop with Data Depot, Australia's leading online seller of Fluke Networks testers?

Data Depot is proud to supply a huge range of cable testers, fibre testers, test phones, hand tools, certification testers, cable fault diagnostics equipment, fibre cleaning tools, termination tools and more from Fluke Networks Australia. You can buy Fluke Networks online through our website 24/7 for fast and reliable delivery.

Data Depot is one of Australia's leading online sellers of data products & accessories. Backed by the Sonepar Group, the leading B2B electrical wholesaler in the world, we have access to the biggest brands such as APC by Schneider Electric, Fluke Networks, Clipsal, Netscout, Panduit, D-Link, ConnectBlue and more - as well as the very best pricing & quick delivery Australia-wide.

Here are just a few reasons our customers keep coming back:

  • - Free shipping on orders over $150 ($6.95 flat rate for orders under $150)
  • - Secure payment methods (VISA, Mastercard & PayPal)
  • - Stock fulfilment from 7 locations nationally
  • - Helpful support base located in Melbourne, Australia (call 1300 944 030 to speak with us)

If you are looking for Fluke Networks testing equipment that is not currently listed on our website, please get in contact with us for pricing and lead-times. We direct partnerships with all suppliers and can source just about anything quickly and at a great price. 

Get in touch with us today - 1300 944 030!


Specifications

Stock Availability stockcms-in-stock-1
GTIN/Barcode 7 54082 05437 5

View FileFluke Networks Solutions Catalog    Size: (5.58 MB)
View FileMS2-KIT Datasheet    Size: (504.31 KB)

Write Your Own Review

Only registered users can write reviews. Please, log in or register