You have no items in your shopping cart.
need help? call us on 1300 944 030
- 10 Gigabit: built-in 100/1G/10G copper and 1G/10G fiber optic test ports for network troubleshooting and performance measurement
- All-in-one: a handheld network tester combining infrastructure, network service and end-to-end path performance measurement in one tool
- Accurate: create and save site-specific network test profiles that emulate how client devices experience the network, including local, intranet and cloud-based services
- Consistent: everyone on the team uses the same preconfigured network test profiles to encourage standardization and best practices
- Fast: all network tests within a profile are run and graded automatically with the touch of a button, enabling identification of the most common problems in about a minute
- Pre-deployment: measure end-to-end path performance prior to the deployment of new services or network infrastructure to assess network readiness
- Post-deployment: measure end-to-end path performance to validate the performance of newly installed network infrastructure and critical network links within the LAN or data center
- Independent: verify independently that service providers are meeting agreed upon service levels (SLAs) and maintaining QoS end-to-end
- Trends: see how network performance varies over time by uploading and viewing results in the cloud using the companion OneTouch AT Cloud Service.
Troubleshoot copper and fiber optic Ethernet problems from client devices to cloud-hosted services - even when you are not there. Troubleshoot persistent network problems and validate network performance in real-time. Troubleshoot intermittent network problems and assess network performance over time with 24/7 automated testing and cloud-based trend analysis.
Ensure that critical network links meet SLA objectives and are ready for new high-bandwidth applications by measuring end-to-end path performance. Measure throughput, frame loss, latency and jitter within sites and data centers and across wide and local area networks. Test at rates up to 10 Gbps over copper or fiber optic links when the OneTouch AT 10G tester is paired with an OptiView XG Network Analysis Tablet. Test at rates up to 1 Gbps when the tester is paired with another OneTouch AT tester or a LinkRunner AT 2000 tester.
Troubleshoot common network issues—or prove that the network is not the cause—by emulating a client device and measuring how the end device experiences the network. Measure the performance of critical network elements: cabling, switches, routers, servers and server-based services and applications. Trend results to the cloud for an understanding of network performance over time. Trending runs automatically, untethering the user from the tester. Long duration testing is invaluable when trying to troubleshoot sporadic, intermittent problems that frequently occur when network support staff is away. Use the OneTouch AT Cloud Service to view and analyze trended results. Also use the cloud service to remotely control the tester and access saved files.
Complete an hour of testing in about a minute with the one-touch AutoTest. An AutoTest is a set of tests tailored to your network, services, and applications. An AutoTest can be simple with only a few tests or advanced consisting of dozens of tests. Once created, an AutoTest can be saved for quick and easy reuse later. Use an AutoTest to establish best practices for consistent, faster, more productive network troubleshooting and network acceptance testing.
|Dimensions (with module and battery installed)||10.3 in x 5.3 in x 2.9 in (26.2 cm x 13.5 cm x 7.3 cm)|
|Weight (with module and battery installed)||3.5 lb (1.6 kg)|
|Display||5.7 in (14.5 cm) LCD with projected capacitance touchscreen, 480 x 640 pixels|
|AC adapter||Input: 100-240 Vac, 50-60 Hz, 1.0 A
Output: +15 Vdc, 2.0 A
|Battery type||Lithium ion battery pack, 7.2 V|
|Battery life||Approximately 3-4 hours depending on type of usage
4 hours to charge from 10% capacity to 90% capacity with the unit powered off
|Memory||Internal: 2 GB shared between system and user files
SD card: 4/8 GB, brand and model selected for optimal performance
USB 2.0 type A port: for use with USB mass storage devices
|Wired Network Interface|
|Network analysis ports||Two RJ-45 10/100/1000BASE-T Ethernet
Two Small Form-factor Pluggable (SFP) 100BASE-FX/1000BASE-X Ethernet
One RJ-45 10/100BASE-T Ethernet
|Supported network standards||IEEE 10BASE-T, IEEE 100BASE-T, IEEE 1000BASE-T, IEEE 100BASE-FX, IEEE 1000BASE-X|
|RFCs and standard MIBs used||1213, 1231, 1239, 1285, 1493, 1512, 1513, 1643, 1757, 1759, 2021, 2108, 2115, 2127, 2233, 2495, 2515, 2558, 2618, 2737, 2790, 2819, 3592, 3895, 3896, 4188, 4502.|
|Not for connection to telephone networks||The OneTouch AT analyzer is NOT designed for connection to a telephone network.
The OneTouch AT analyzer is NOT designed for connection to an ISDN line.
Do not connect to a telephone network or ISDN line except through a regulatory agency compliant computer network modem device.
|Wi-Fi Network Interface|
|Wi-Fi connectivity||802.11a, 802.11b, 802.11g, 802.11n, 802.11ac|
|Data rate||802.11a: 6/9/12/24/36/48/54 Mbps
802.11b: 1/2/5.5/11 Mbps
802.11g: 6/9/12/24/36/48/54 Mbps
802.11n (20 MHz): MCS0-23, up to 216 Mbps
802.11n (40 MHz): MCS0-23, up to 450 Mbps
802.11ac(80 MHz):MCS0NSS1-MCS9NSS3, up to 1.3 Gbps
|Operating frequency||2.412 ~ 2.484 GHz (Industrial Scientific Medical Band)
5.170 ~ 5.825 GHz
64/128-Bit WEP Key, WPA, WPA2, 802.1X
|Transmit output power1 (tolerance: ±2.0 dBm)||802.11a: 16 dBm ± 2 dBm @ 54 Mbps
802.11b: 20 dBm ± 2 dBm @ 11 Mbps
802.11g: 17 dBm ± 2 dBm @ 54 Mbps
802.11gn HT20: 17 dBm ± 2 dBm @ MCS23
802.11gn HT40: 16 dBm ± 2 dBm @ MCS23
802.11an HT20: 15 dBm ± 2 dBm @ MCS23
802.11an HT40: 15 dBm ± 2 dBm @ MCS23
802.11ac VHT20: 13 dBm +/- 2 dBm @ MCS8NSS3
802.11ac VHT40: 13 dBm +/- 2 dBm @ MCS9NSS3
802.11ac VHT80: 11 dBm +/- 2 dBm @ MCS9NSS3
|Receive sensitivity (tolerance: ±2 dBm)||802.11b : -88dBm@11Mbps
802.11g : -74dBm@54Mbps
802.11gn : -69dBm@HT20,MCS23
802.11gn : -67dBm@HT40,MCS23
802.11a : -73dBm@54Mbps
802.11an : -68dBm@HT20,MCS23
802.11an : -66dBm@HT40,MCS23
802.11ac : -64dBm@VHT20, MCS8NSS3
802.11ac : -63dBm@VHT40, MCS9NSS3
802.11ac : -60dBm@VHT80, MCS9NSS3
|1. The maximum power setting will vary by channel and according to individual country regulations.|
|Internal Wi-Fi antennas||Three internal 2.4 GHz, 1.1 dBi peak, 5 GHz, 3.2 dBi peak antennas supporting 3x3 MIMO technology|
|External directional antenna||Antenna, frequency range 2.4 - 2.5 and 4.9 - 5.9 GHz.
Minimum gain 5.0 dBi peak in the 2.4 GHz band, and 7.0 dBi peak in the 5 GHz band.
|External antenna connector (external antenna port is receive-only, no transmit)||Reverse SMA|
|Environmental and Regulatory|
|Operating temperature||32°F to 122°F (0°C to 50°C)|
|Battery charging temperature||32°F to 104°F (0°C to 40°C)|
|Storage temperature||-40°F to 160°F (-40°C to 71°C)
-4°F to 122°F (-20°C to 50°C) for periods longer than 1 week
|Operating relative humidity (% RH without condensation)||5% to 45% at 32°F to 122°F (0°C to 50°C)
5% to 75% at 32°F to 104°F (0°C to 40°C)
5% to 95% at 32°F to 86°F (0°C to 30°C)
|Shock and vibration||Meets the requirements of MIL-PRF-28800F for Class 3 Equipment|
|Safety||CAN/CSA-C22.2 No. 61010-1-04, IEC 61010-1:2001|
|Operating altitude||13,123 ft (4,000 m), 10,500 ft (3,200 m) with ac adapter|
|Storage altitude||39,370 ft (12,000 m)|
|Cable types||100 Ω Unshielded Twisted Pair (UTP) LAN cables.
100 Ω Shielded or Screened Twisted Pair (SeTP) LAN cables.
TIA Category 3, 4, 5, 5e, and 6. ISO Class C, D, E and F.
|Cable length measurement||Measurable cable lengths are from 3 feet (1 meter) to 656 feet (200 meters).
Accuracy: ± 6 feet (± 2 meters) or 5%, whichever is greater.
Length measurement is based on Nominal Velocity of Propagation (NVP) for CAT 5e cable.
|Wired||Speed, duplex, PoE, 802.1X, IPv4 address, IPv6 address, MAC address (port A can be changed by the user), VLAN, Wait for Rx Frame, Enabled Wired|
|Wi-Fi||Band (2.4 and/or 5 GHz), authorization default, scan or connect, SSID, security, IPv4 address, IPv6 address, MAC address (Wi-Fi adapter can be changed by the user), Transmit Probes, Enable Wi-Fi, signal adjustment, noise floor adjustment|
|Analysis||SNMP v1/v2, SNMP v3, Slow Discovery|
|Trending||Use (wired port, Wi-Fi port, management port), duration (2 minutes to 1 week),interval (1, 2, 5, 10, 30, 60 minutes), proxy (off/on)|
|Claim Unit||Claim, proxy (off/on)|
|Unit Name||Text string|
|Management port||User and password security, Active Port (Wired/Wi-Fi), wired port configuration, Wi-Fi port configuration|
|Language (user interface)||Chinese (simplified), English, French, German, Japanese, Korean, Portuguese, Russian, Spanish|
|Date/time, number, length||Select format|
|Timeout period||Backlight time, power down time|
|Audible tone||On, off|
|Factory defaults restore||Quick, full (complete internal storage overwrite)|
|Version Information||Module, platform|
|Product Registration||Registered, Gold Support|
|Update Software||Select Source|
|Options||Enter product key|
|Export logs||Export to SD card|
|Receive Rx optical power measurement||accuracy varies by transceiver, typically ± 3.0 dB|
|Power over Ethernet (PoE)||Single ended testing:
|Infrastructure||Cable, link, PoE, nearest switch, nearest AP, DHCP server, DNS server, gateway|
|Wired Analysis||hosts, access devices, servers, tools (port scan, add test, path analysis, multiport statistics,devices on port, browse, TELNET/SSH), sorts|
|Discovery protocols supported||SNMP v1/v2/v3, CDP, EDP, LLDP, ICMP, ARP, FDP|
|Wi-Fi Analysis||networks, access points, clients, channels, tools (name, authorization, connect, locate, capture), sorts, show active|
|Services||Ping (ICMP), connect (TCP), web (HTTP), file (FTP), multicast (IGMP), video (RTSP), email (SMTP)|
|Wired Performance (local to remote)||
|Wi-Fi Performance (local to remote)||
|Performance Peer||Port number, enable Autostart|
|Telnet/SSH||Username/password (for SSH)|
|Toner||IntelliTone™, analog 400 Hz, analog 1 kHz|
|Flash switch port||1s, 2s, 3s|
|FiberInspector™/Webcam||real time, pause, scale (for fiber), save|
|Profiles||Save, delete, rename, export, import, load|
|AP authorization||Save, delete, rename, export, import, load|
|Reports||Save, delete, rename, export, import, view|
|Screens||Save, delete, rename, export, import, view|
|Certifications and Compliance|
|Conformite Europeene. Conforms to the requirements of the European Union and the European Free Trade Association (EFTA).|
|Listed by the Canadian Standards Association.|
|Conforms to relevant Australian standards.
No attachment found.