APC BR1500GI Power saving Back-UPS Pro 1500, 230V

Product Code: BR1500GI

Quick Overview

High Performance Computer and Electronics UPS for Premium Power Protection

Availability: In stock

Shipped same day! If ordered before 2pm AEST

$494.04 incl. GST

Details

BR1500GIFeatures

APC Power-Saving Back-UPS Pro 1500, 230V

High Performance Computer and Electronics UPS for Premium Power Protection

Includes : CD with software , Qty 1- Detachable IEC Power Cord , Telephone Cable , USB cable , User Manual , Warranty card

  • Adjustable voltage sensitivity: Provides the ability to adapt the UPS for optimal performance in specific power environments or generator applications.
  • Adjustable voltage-transfer points: Maximizes useful battery life by widening the input voltage window or tightening the output voltage regulation.
  • Audible alarms: Provides notification of changing utility power and UPS power conditions
  • Automatic self-test: Periodic battery self-test ensures early detection of a battery that needs to be replaced.
  • Battery failure notification: Provides early-warning fault analysis on batteries enabling timely preventive maintenance
  • Battery replacement without tools: Enables fast battery replacement, lowering Mean Time to Repair (MTTR).
  • Battery-protected and surge-only outlets: Reserves power capacity and run time for connected equipment that require UPS battery back-up while providing surge only protection for less critical equipment
  • Boost and Trim Automatic Voltage Regulation (AVR): Eliminates voltage fluctuations as a source of AV signal degradation and component power-supply stress.
  • Building Wiring Fault Indicator: This LED informs users of potentially dangerous wiring problems in the wall circuit.
  • Cold-start capable: Provides temporary battery power when the utility power is out.
  • Dataline surge protection: Provides protection of connected equipment from power surges on the data lines.
  • Disconnected battery notification: Warns when a battery is not available to provide backup power.
  • Extendable Run Time: Additional batteries can be added to provide power to the load for an extended period of time in the event of utility supply failure.
  • Green mode: Patent-pending operating mode that bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection.
  • Hot-swappable batteries: Ensures clean, uninterrupted power to protected equipment while batteries are being replaced
  • Intelligent battery management: Maximizes battery performance, life, and reliability through intelligent, precision charging.
  • LCD graphics display: Text and mimic diagrams that display modes of operation, system parameters and alarms.
  • Power-saving outlets: Automatically cuts power to idle equipment to conserve electricity.
  • Resettable circuit breaker: Easy recovery from overloads; no need to replace a fuse.
  • Safety-agency approved: Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.
  • Serial connectivity: Use any Home Automation network to monitor and control the S20 through its RS-232 serial port. For information on how to communicate with the S20, see APC's Application Note #102. Crestron and AMX installers should visit their respective websites for information on how to integrate the S20 into those networks.
  • Telephone dataline surge protection: Provides protection of connected equipment from power surges traveling on telephone lines.
  • Transformer-block spaced outlets: Protect equipment with input transformer blocks without blocking access to other receptacles.
  • USB connectivity: Provides management of the UPS via a USB port (not available on all models).
  • User-replaceable batteries: Increases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR)

Back-UPS ProFeatures & Benefits

Manageability

  • Audible alarms: Provides notification of changing utility power and UPS power conditions
  • LCD Status Display: Provides key UPS status at a glance. Multiple status indicators with load and battery bar graphs.
  • USB connection: Use your PC to access additional power protection and management features for your UPS via a USB Port.
  • Disconnected battery notification: Warns when a battery is not available to provide backup power.

Protection

  • Surge only outlets: Protect secondary electronics from surges and spikes without reducing battery power used to run primary electronics during an outage.
  • Battery and surge protected outlets: Back up and protect your hardware and data during power outages, surges and spikes.
  • Dataline surge protection: Provides protection of connected equipment from power surges on the data lines.

Marketing Features

  • Battery-protected and surge-only outlets: Reserves power capacity and run time for connected equipment that require UPS battery back-up while providing surge only protection for less critical equipment
  • LCD Status Display: Provides key UPS status at a glance. Multiple status indicators with load and battery bar graphs.
  • Boost Automatic Voltage Regulation (AVR): Preserves battery life and maximizes runtime by correcting low voltages without discharging the battery.
  • Energy Management Function: Energy saving feature automatically power off peripherals when the a master device, usually a PC, hibernates or is shut down. Power to peripherals is immediately restored when the master device wakes up or is switched on.
  • Green mode: Patent-pending operating mode that bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection.

Safety

  • Safety-agency approved: Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.

Serviceability

  • Resettable circuit breaker: Easy recovery from overloads; no need to replace a fuse.
  • Simple battery replacement: Increases UPS availability by allowing quick, easy battery replacement.

Availability

  • Automatic self-test: Periodic battery self-test ensures early detection of a battery that needs to be replaced.
  • Battery failure notification: Provides early-warning fault analysis on batteries enabling timely preventive maintenance
  • Cold-start capable: Provides temporary battery power when the utility power is out.
  • Intelligent battery management: Maximizes battery performance, life, and reliability through intelligent, precision charging.
  • Transformer-block spaced outlets: Protect equipment with input transformer blocks without blocking access to other receptacles.
  • Customizable voltage-transfer points: Adjust the voltage points (widen or tighten the range) where your UPS transfers to battery to maximize useful battery life and protect sensitive electronics.
  • Customizable voltage sensitivity: Toggle between pre-determined voltage-transfer points depending on your power quality (high, medium or low sensitivity), maximizing useful battery life and protecting sensitive electronics.
  • Boost and Trim Automatic Voltage Regulation (AVR): Gives higher application availability by correcting low and high voltage conditions without using the battery (not available on all models).
  • Green mode: Patent-pending operating mode that bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection.
  • Energy Management Function: Energy saving feature automatically power off peripherals when the a master device, usually a PC, hibernates or is shut down. Power to peripherals is immediately restored when the master device wakes up or is switched on.

 

Specifications

Output Output Power Capacity: 865 W/1500 VA 
Nominal Output Voltage: 230V 

Output Frequency (sync to mains): 50/60 Hz +/- 3 Hz
Crest Factor: 3 : 1 
Topology: Line Interactive 
Waveform Type: Stepped approximation to a sinewave 
Output Connections: 
• 5x IEC 320 C13 / Battery Backup 
• 5x IEC 320 C13 / Surge Protection 
• 2x IEC Jumpers / Battery Backup
Input Nominal Input Voltage: 230V 
Input Frequency: 50/60 Hz +/- 3 Hz (auto sensing)
Input Connections: IEC-320 C14 
Input voltage range for main operations: 176 - 294V 
Input voltage adjustable range for mains operation: 156 - 300V 
Input Breaker Capacity: 10.0 A
Batteries & Runtime Battery Type: Maintenance-free sealed Lead-Acid battery with suspended electrolyte, leakproof
Typical recharge time: 8 hours 
Replacement Battery: APCRBC124 
RBC Quantity: 1 
Full load: 8 min / 720W
Half Load: 20 min / 360W
Extended Run Options: APC Power-Saving Back-UPS Pro 1500, 230 V
Communications & Management Interface Port: USB 
Control panel: Multi-function LCD status and control console 
Audible Alarm: Alarm when on battery, distinctive low battery alarm, overload continuous tone alarm
Surge Protection and Filtering Surge energy rating: 441 Joules 
Filtering: Full time multi-pole noise filtering, 10% of IEEE surge let-through, zero clamping response time instantaneous 
Data Line Protection: Analog phone line for phone/fax/modem/DSL (RJ-11 connector),Network line - 10/100/1000 Base-T Ethernet (RJ-45 connector)
Conformance Regulatory Approvals A-tick,C-tick,CE,GOST,GS Mark,Telepermit,TUV 
Environmental Compliance: RoHS,REACH. Contains No SVHCs
Environmental Requirements Operating Temperature: 32 - 104°F / 0 to 40°C
Storage Temperature: 23 - 113°F / -15 to 45°C
Humidity: 0-95%
Operating Elevation: 10,000' / 3000 m
Storage Elevation: 50,000' / 15,000 m
Equipment Protection Lifetime: 200,000 AUD - 150,000 Euros - 75,000 GBP
Dimensions (HxWxD) 11.89 x 4.41 x 15" / 302 x 112 x 382 mm
Weight 25.52 lbs / 11.6kg

 




Specifications

GTIN/Barcode 731304268741

No attachment found.

Write Your Own Review

Only registered users can write reviews. Please, log in or register